Last year with the help of a friend I had purchased Helle Viking Knife blanks from Ragweed Forge to make into groomsman gifts for a commission. We visited Dixon’s Muzzleloading Shop to pick-up gun stock scraps of tiger maple for the handles and scraps of leather to make into sheaths.
We shaped the handles and hand sanded with 220 grit on the wood and 400 at grit on the bolster edge.
We then raised the grain on the wood 3x. The process was the apply water to the wood with fingers, use a propane torch to rapidly dry the wood to raise the grain and rub the wood smooth again with 0000 steel wool.
Next the Aquafortis acid stain was applied with a dauber to all handles. The torch was used to oxidize the stain and the heat turned the wood reddish brown. This was started at the bolster because the brass…
View original post 202 more words